show ip bgp injected-paths

show ip bgp injected-paths

To display all the injected paths in the BGP routing table, use the show ip bgp injected-paths command in EXEC mode.

show ip bgp injected-paths

Syntax Description: This command has no arguments or keywords.

Command Modes EXEC

Examples

show ip bgp

show ip bgp

To display entries in the Border Gateway Protocol (BGP) routing table, use the show ip bgp command in EXEC command.

show ip bgp [network] [network-mask] [longer-prefixes] [prefix-list prefix-list-name | route-map
route-map-name] [shorter prefixes mask-length]

Syntax

1. network (Optional) Network number, entered to display a particular network in the BGP routing table.
2. network-mask (Optional) Displays all BGP routes matching the address and mask pair.
3. longer-prefixes (Optional) Displays the route and more specific routes.
4. prefix-list | route-map (Optional) Displays selected routes from a BGP routing table based on the contents of a prefix list or route map.
5. prefix-list-name | route-map-name (Optional) The name of the route map or prefix list that is specified for the above argument.
6. shorter prefixes mask-length (Optional) Displays learned prefixes that are longer than the maximum length but shorter than the specified mask for the prefix.

Command Modes : EXEC

Examples: (Please Click for Clear View)










Related Commands

• clear ip bgp Resets a BGP connection or session.
• neighbor soft-reconfiguration Configures the Cisco IOS software to start storing updates.